Industrial Machinery Mechanics, Machinery Maintenance Workers, and Millwrights

Summary

What Industrial Machinery Mechanics, Machinery Maintenance Workers, and Millwrights Do About this section

Industrial machinery mechanics and machinery maintenance workers adjust and calibrate equipment.

Industrial machinery mechanics and machinery maintenance workers maintain and repair factory equipment and other industrial machinery, such as conveying systems, production machinery, and packaging equipment. Millwrights install, dismantle, repair, reassemble, and move machinery in factories, power plants, and construction sites.

Duties

Industrial machinery mechanics, machinery maintenance workers, and millwrights typically do the following:

• Read technical manuals to understand equipment and controls
• Disassemble machinery and equipment when there is a problem
• Repair or replace broken or malfunctioning components
• Perform tests and run initial batches to make sure that the machine is running smoothly
• Detect minor problems by performing basic diagnostic tests
• Test malfunctioning machinery to determine whether major repairs are needed
• Adjust and calibrate equipment and machinery to optimal specifications
• Clean and lubricate equipment or machinery
• Move machinery and equipment

Industrial machinery mechanics, also called maintenance machinists, keep machines in working order by detecting and correcting errors before the machine or the products it produces are damaged. Many of these machines are increasingly run by computers. Industrial machinery mechanics use technical manuals, their understanding of industrial equipment, and observation to determine the cause of a problem. For example, after detecting a vibration from a machine, they must decide whether it is the result of worn belts, weak motor bearings, or some other problem. They may use computerized diagnostic systems and vibration analysis techniques to help figure out the source of problems. Examples of machines they may work with are robotic welding arms, automobile assembly line conveyor belts, and hydraulic lifts.

After diagnosing a problem, the industrial machinery mechanic may take the equipment apart to repair or replace the necessary parts. Once a repair is made, mechanics test a machine to ensure that it is operating correctly.

In addition to working with hand tools, mechanics commonly use lathes, grinders, and drill presses. Many also are required to weld.

Machinery maintenance workers do basic maintenance and repairs on machines. They clean and lubricate machinery, perform basic diagnostic tests, check the performance of the machine, and test damaged machine parts to determine whether major repairs are necessary.

Machinery maintenance workers must follow machine specifications and adhere to maintenance schedules. They perform minor repairs, generally leaving major repairs to industrial machinery mechanics.

Maintenance workers use a variety of tools to do repairs and preventive maintenance. For example, they may use a screwdriver or socket wrenches to adjust a motor’s alignment, or they might use a hoist to lift a heavy printing press off the ground.

Millwrights install, maintain, and disassemble industrial machines. Putting together a machine can take a few days or several weeks.

Millwrights perform repairs that include replacing worn or defective parts of machines. They also may be involved in taking apart the entire machine, a common situation when a manufacturing plant needs to clear floor space for new machinery. In taking apart a machine, millwrights carefully disassemble, categorize, and package each part of the machine.

Millwrights use a variety of hand tools, such as hammers and levels, as well as equipment for welding, brazing, and cutting. They also use measuring tools, such as micrometers, measuring tapes, lasers, and other precision-measuring devices. On large projects, they commonly use cranes and trucks. When millwrights and managers determine the best place for a machine, millwrights use forklifts, hoists, winches, cranes, and other equipment to bring the parts to the desired location.

Work Environment About this section

Industrial machinery mechanics, machinery maintenance workers, and millwrights usually work in manufacturing facilities.

Injuries and Illnesses

Working with industrial machinery can be dangerous. To avoid injury, workers must follow safety precautions and use protective equipment, such as hardhats, safety glasses, steel-toed shoes, gloves, and earplugs.

Work Schedules

Most industrial machinery mechanics and machinery maintenance workers are employed full time during regular business hours. However, mechanics may be on call and work night or weekend shifts. Overtime is common, particularly for mechanics.

How to Become an Industrial Machinery Mechanic, Machinery Maintenance Worker, or Millwright About this section

Industrial machinery mechanics may receive more than a year of on-the-job training, while machinery maintenance workers typically receive training that lasts a few months to a year.

Industrial machinery mechanics, machinery maintenance workers, and millwrights typically need a high school diploma. Industrial machinery mechanics and machinery maintenance workers also usually need a year or more of training after high school.

Most millwrights go through an apprenticeship program that lasts about 4 years.

Education

Industrial machinery mechanics, machinery maintenance workers, and millwrights generally need at least a high school diploma or equivalent. Some mechanics and millwrights complete a 2-year associate’s degree program in industrial maintenance. Industrial maintenance programs may include courses such as welding, mathematics, hydraulics, and pneumatics.

Training

Industrial machinery mechanics and machinery maintenance workers typically receive more than a year of on-the-job training. Industrial machinery mechanics and machinery maintenance workers learn how to perform routine tasks, such as setting up, cleaning, lubricating, and starting machinery. They also may be instructed in subjects such as shop mathematics, blueprint reading, proper hand tool use, welding, electronics, and computer programming. This training may be offered on the job by professional trainers hired by the employer or by representatives of equipment manufacturers.

Most millwrights learn their trade through a 3- or 4-year apprenticeship. For each year of the program, apprentices must have at least 144 hours of relevant technical instruction and up to 2,000 hours of paid on-the-job training. On the job, apprentices learn to set up, clean, lubricate, repair, and start machinery. During technical instruction, they are taught welding, mathematics, how to read blueprints, and machinery troubleshooting. Many also receive computer training.

After completing an apprenticeship program, millwrights are considered fully qualified and can usually perform tasks with less guidance.

Employers, local unions, contractor associations, and the state labor department often sponsor apprenticeship programs. The basic qualifications for entering an apprenticeship program are as follows:

• Minimum age of 18
• High school diploma or equivalent
• Physically able to do the work

Important Qualities

Manual dexterity. Industrial machinery mechanics, machinery maintenance workers, and millwrights must have a steady hand and good hand–eye coordination when handling very small parts.

Mechanical skills. Industrial machinery mechanics, machinery maintenance workers, and millwrights use technical manuals and sophisticated diagnostic equipment to figure out why machines are not working. Workers must be able to reassemble large, complex machines after finishing a repair.

Troubleshooting skills. Industrial machinery mechanics, machinery maintenance workers, and millwrights must observe, diagnose, and fix problems that a machine may be having.

Pay About this section

Most industrial machinery mechanics and machinery maintenance workers are employed full time during regular business hours. However, mechanics may be on call or assigned to work night or weekend shifts. Overtime is common, particularly for mechanics.

Job Outlook About this section

Overall employment of industrial machinery mechanics, machinery maintenance workers, and millwrights is projected to grow $pc.toString().replaceAll("^\-","") percent from 2020 to 2030, $gra.

About $tools.number.format('#,###',$op) openings for industrial machinery mechanics, machinery maintenance workers, and millwrights are projected each year, on average, over the decade. Many of those openings are expected to result from the need to replace workers who transfer to different occupations or exit the labor force, such as to retire.

Employment

Overall employment of industrial machinery mechanics, machinery maintenance workers, and millwrights is projected to grow 5 percent from 2018 to 2028, about as fast as the average for all occupations. Employment growth will vary by occupation.

The increased adoption of sophisticated manufacturing machinery will require more mechanics and millwrights to keep machines in good working order. Increased automation, including the use of many computer-controlled machines in factories and manufacturing plants, should raise the demand for machinery maintenance workers in order to keep the machines functioning properly. The increased use of machinery in manufacturing will require millwrights to install and disassemble this equipment, as well as perform some repair work on it.

Job Prospects

Job prospects will be good, particularly for applicants with a broad range of skills in machine repair as older workers retire or otherwise leave the occupation.

State & Area Data About this section

Occupational Employment and Wage Statistics (OEWS)

The Occupational Employment and Wage Statistics (OEWS) program produces employment and wage estimates annually for over 800 occupations. These estimates are available for the nation as a whole, for individual states, and for metropolitan and nonmetropolitan areas.

Projections Central

Occupational employment projections are developed for all states by Labor Market Information (LMI) or individual state Employment Projections offices. All state projections data are available at www.projectionscentral.com. Information on this site allows projected employment growth for an occupation to be compared among states or to be compared within one state. In addition, states may produce projections for areas; there are links to each state’s websites where these data may be retrieved.

CareerOneStop

CareerOneStop includes hundreds of occupational profiles with data available by state and metro area. There are links in the left-hand side menu to compare occupational employment by state and occupational wages by local area or metro area. There is also a salary info tool to search for wages by zip code.

Contacts for More Information About this section

For information about industrial machinery mechanics and machinery maintenance workers, visit

National Association of Manufacturers

Society for Maintenance & Reliability Professionals

For information about millwrights and the precision-machined products industry, training, and apprenticeships, visit

Precision Machined Products Association

For further information on apprenticeship programs, write to the Apprenticeship Council of your state’s labor department or to local firms that employ machinery mechanics and repairers. Apprenticeship information is also available from the U.S. Department of Labor’s Apprenticeship program online or by phone at 877-872-5627.